Edimax Technology PS-1206MFG - Manual (Page 42)

34
minutes (5-255)
disconnect the current connection after the MFP is idle
for a specified period of time. By default, it is never
released. It is recommended to enable the setting after
the MFP and MFP Server are installed completely so that
the MFP resource will not be occupied permanently.
6.3 Auto Connect List
To let the system occupy the MFP server automatically when you want to print
a document just like the behavior of using traditional print server, you can add
the MFP into your Auto Connect List. The system will send the printing jobs to
the MFP when the MFP Server is idle and not being connected.
Tip: If you have sent a printing job to the MFP while the MFP is connecting
by a user, you may be prompted that the device is not found or the document
is failed to print. It also happens in some MFPs or printers even though the