Fein ASte636 - Manual (Page 12)

12
en
Instruction manual for jigsaw/pipe hacksaw.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø Diameter of a round part
Max. work piece thickness for steel with up to 400 N/mm
2
Max. work piece thickness in steel (INOX)
Max. work piece thickness for aluminium with up 250 N/mm
2
Max. work piece thickness in wood
Max. work piece thickness in hard wood and plywood
Max. work piece thickness in copper/brass
Max. work piece thickness in fibre-glass/hard particle materials
Radius of smallest curve in steel, wood/plastic
Weight according to EPTA-Procedure 01/2003
Low stroke rate
High stroke rate
WARNING
Fe 400
Fe INOX
Al 250
Cu, Ms
GFK
r
3 41 00 910 06 9.book Seite 12 Montag, 23. Juni 2008 11:56 11