Song recording, Clear, Voice & volume rewrite – Yamaha PSR-520 User Manual

Page 55: Clearing the song tracks

Advertising
background image

54

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Song Recording

Voice & Volume Rewrite

You can rewrite the last recorded voice change in any individual track

during playback by using the cursor buttons to select the voice number of
the target track (the voice number will flash), and then using the number
buttons, the [–/NO] and [+/YES] buttons or the data dial to select the de-
sired voice number. The data will actually be rewritten when the [PLAY/
STOP]
button is pressed or the end of the song is reached or the next voice
change is encountered in the recorded data. The original voice number can
be recalled before it is actually rewritten by simultaneously pressing the
[–/NO] and [+/YES] buttons. Any other voice changes included in the re-
corded track data will take effect at the appropriate times.

Clearing the SONG TRACKS

All data in the ACCOMP, MELODY 1 and MELODY 2 tracks of the

currently selected song can be completely erased by first pressing the [MI-
NUS ONE]
button while holding the [REC] button, and then press the
[+/YES] button in response to the “Clear?” confirmation prompt on the dis-
play (press [–/NO] if you decide not to erase the data).

The volume of each track can be rewritten during playback in the same

way. Use the cursor buttons to select the volume bar of the target track (the
volume bar will flash), and then use the [–/NO] and [+/YES] buttons or the
data dial to set the maximum volume of the track as required. The shorter
the bar, the lower the volume. The data will actually be rewritten when the
[PLAY/STOP] button is pressed or the end of the song is reached. The
original volume can be recalled before it is actually rewritten by simultane-
ously pressing the [–/NO] and [+/YES] buttons. The new volume data is
written only at the beginning of the track and affects the entire track.

• The dual voice will change

automatically when a melody
track voice is changed.

• Voice and volume data can

only be rewritten in songs you
have recorded yourself.

• Only songs you have recorded

yourself can be cleared.

• If a non-user song number is

selected when the song-clear
mode is engaged, user song
number 26 will automatically
be selected.

–/NO

+

/ YES

6

5

4

0

7

8

9

1

2

3

1– –

*

*

CURSOR

ACCOMP

MELODY

2

MELODY

1

REC

REC

REC

1

01

1

03

/

REC

PLAY/STOP

REPEAT

PLAY

MINUS

ONE

SONG

Clear

?

1

26

Advertising