ROWENTA MINI SPACE CYCLONIC RO3349 - Manual (Page 12)

8
Standard accessories:
16. Flexible hose with power nozzle and adjustable manual power switch
17. Telescopic tube*
18. Tubes*
19. All floor type nozzle
20. Parquet nozzle*
21. Upholstery nozzle*
22. Crevice tool with little brush function*
23. Turbo-brush*
24. Mini turbo-brush*
III. BEFORE USING FOR THE FIRST TIME
REMOVING PACKAGING
• Unpack your appliance, keep your guarantee form and read the instructions carefully before using your
appliance for the first time.
ADVICE AND PRECAUTIONS
• Each time before use, the power cord must be unwound completely.
• Do not jam it and do not allow it to rub against sharp edges.
• If you’re using an electrical extension, check that it is in perfect condition and that it is suited to the
power of your vacuum cleaner.
• Do not move the vacuum cleaner by pulling on the power cord, the appliance must be moved using its
carrying power nozzle.
• Do not use the power cord for lifting the appliance.
• Never unplug the appliance by pulling on the power cord.
• Never operate the vacuum cleaner without its dust container (10) or without the(H)EPA filter cassette
(11):black foam filter (11a) and (H)EPA filter (11b).
• Check that the foam microfilter (9) is correctly in place.
• Only use original Rowenta filters.
• Only use original Rowenta accessories.
• if you experience difficulties obtaining the accessories and filters for this vacuum cleaner, contact
Rowenta customer services (you can find their contact details on the last page).
• Switch off and unplug your vacuum cleaner once you’ve finished using it.
• Always switch off and unplug your vacuum cleaner before maintaining or cleaning it.
• This appliance is not intended to be used by persons (including children) with reduced physical, sen-
sory or mental capacities, or without the necessary experience and knowledge unless they are super-
vised or have been given instructions beforehand on the use of the appliance by a person responsible
for their safety. Children should be supervised to make sure they do not play around with the appli-
ance.
IV. USING THE APPLIANCE
ASSEMBLING THE ELEMENTS OF THE APPLIANCE
• Push the flexible hose (16) firmly into the vacuum inlet (7) and turn until it locks - Fig.1.
• To remove it, turn in the opposite direction and pull - Fig.2.
• If your vacuum cleaner is fitted with a telescopic tube* (17): push the adjustment button forwards,
pull out the required length of tube then release the button to block it- Fig.3. Otherwise, assemble the two
tubes* (18), by turning slightly - Fig.4.
• Fit the appropriate accessory to the end of the tube:
- For rugs and carpets: use the nozzle (19) in the retracted brush nozzle position - Fig.5.
- For parquets and smooth floors: use the nozzle (19) in the advanced brush nozzle position - Fig.5.
or just use the parquet nozzle* (20).
- For corners and hard to reach spots: use the crevice tool with little brush function* (22) in flat nozzle position.
- For furniture: use the crevice tool with little brush function * (22) or the upholstery nozzle* (21).
Important!
Always switch off and unplug your vacuum cleaner before changing the accessories.
Depending on models: either equipment specific to certain models or available as an optional accessory.
RO_ASPIRATEUR_MINI-SPACE-CYCLONIC_902827_902827 16/06/11 11:08 Page8