ROWENTA FRESH AIR EP7980 - Manual (Page 6)

9-CLEANING THE APPLIANCE
• Cleaning the epilator head:
1. Unplug the epilator.
2. Press the release button on the head and remove the epilator head.
3. Rinse the epilator head under cold running water by turning it for 5 to 10 seconds.
4. Shake the epilator head vigorously and
dry it with a towel before fitting it to the
epilator again.
You can also use the small cleaning brush
supplied.
1
2
8-HAIR REMOVAL FROM SENSITIVE AREAS
With the shaver head :
• Operating instructions:
- Remove the epilator head by pressing the ejection button.
- Fit the shaver head (14) onto the appliance
- Set the switch to position 2.
- After use, stop the appliance.
- Remove the shaver head by pressing the ejection button.
4
• Cleaning the shaving head
- Stop and unplug the device.
- Remove the protective hood (17).
To do so: hold the appliance firmly and place your fingers on the grip
zone (15) on the shaving head and then pull upwards.
You will remove the protective hood (17) from the blade unit (16).
NOT EP7980 1800112246:EP7980 19/12/07 11:29 Page 4