ROWENTA FRESH AIR EP7980 - Manual (Page 7)

5
- Carefully remove the hairs by blowing on
and around the micro grid (13)
Never use the small brush for cleaning the micro grid (13).
You can also run the protective hood (17) and the blade block (16)
under running cold water to remove all the hair. Shake the parts well
and then dry them using a towel without pressing down on the micro
grid before reassembling them.
- Put the protective hood (17) back on the blade unit (16).
You will hear a click.
DO NOT PRESS ON THE MICRO GRID WHEN PUTTING IT BACK INTO PLACE.
Do not apply alcohol to the body of the appliance in order to avoid damaging
its colours. Do not use a metal or sharp tool.
• Cleaning the Exfoliator Head.
We recommend that you change the exfoliating band after three
sessions of exfoliation or when it is worn out.
Do not clean the band under running water.
10-SKIN CARE
Small red spots may appear. They will disappear quickly.
For this reason it is preferable to use your depilator in the evening.
If necessary, apply calming cream after depilation.
11-ENVIRONNEMENT PROTECTION FIRST
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a collection point.
!
NOT EP7980 1800112246:EP7980 19/12/07 11:29 Page 5