Operation, Fan speed, Ventilation setting – MITSUBISHI ELECTRIC LGH-50RSDC-E User Manual

Page 2

Advertising
background image

2

Damper

Return air

Supply air

Lossnay core

Exhaust air

Fresh air

Fresh air

Lossnay core

Damper

Return air

Supply air

Exhaust air

n

AUTOMATIC VENTILATION setting

The automatic damper mode automatically provides the correct ventilation for the conditions in the room. The following shows the effect “By-pass”

ventilation will have under various conditions.

1. Reduces cooling load

If the air outside is cooler than the air inside the building during the cooling season (such as early morning or at night), “By-pass” ventilation will draw

in the cooler outside air and reduce the cooling load on the system.

2. Night purge

“By-pass” ventilation can be used to release hot air from inside the building that has accumulated in buildings a business district during the hot

summer season.

3. Office equipment room cooling

During cold season, fresh air can be drawn in and used as is to cool rooms where the temperature has risen due to the use of office equipment.

l

In the case of “By-pass” ventilation, the supply air temperature slightly rises more than the outside air temperature because of the heat

effect around the ducts or the unit motors.

l

Operate by 5 fan speed (Lowest speed) during night time, for low noise level, energy saving and preventing to intake water mist of fog

during night.

l

Operate by 5 fan speed in foggy day.

Operation

1. Fan speed

n

The wide range of fan speed and the low power consumption

This unit has 5 fan speed settings 110 l/s to 25 l/s, and 14w ultra low power consumption for Lossnay ventilation, thanks of DC blushless motor

technology.

n

Power "BY-PASS" mode setting

This unit has 130 l/s extra-high fan speed for "By-pass" ventilation over 5 fan speed.

2. Ventilation setting

n

LOSSNAY ENERGY RECOVERY VENTILATE setting

Both fresh air supply and return air pass through the Lossnay cores.

Resulting in total heat exchange. Energy recovery ventilation makes

the fresh air temperature close to the indoor temperature in the winter

and the summer season.

n

"BY-PASS" VENTILATE setting

The fresh air passes through the Lossnay cores and the return room

air is exhausted direct. Energy recovery "By-pass" ventilation is

normally operated during the spring/autumn months.

This Lossnay unit is operated by Remote controller. (provided by installer)

Please refer to installer for further information.

Advertising