SoundMax SM-MSD10 User Manual
Page 20
20
ooting guide
table describing simple measures that can help you eliminate most problems likely to emerge when this
w measures do not help, turn to a service center or to the nearest dealer.
Symptom
Cause
Solution
Poor audio cable connection
Make proper connection
Disc dirty or damaged
Clean the disc
No sound
MUTE function is on
Disable MUTE function
Poor video cable connection
Make proper connection
No image
Setup doesn’t correspond to the actual connections
Press and hold V-MODE button until picture appears
Disc not inserted
Insert the disc
Disc inserted incorrectly
Install the disc with the label side facing up
Disc cannot
be read
Condensate on the unit laser head
Switch the unit on without disc for an hour
Remote control is incorrectly directed at the unit
Use the remote controller according to the manual
Distance and angle to the unit are too large
Decrease the distance and angle
Remote
control does
not operate
Run out batteries
Replace both batteries
Incorrect key sequence
Repeat the operation one more time
No image
Static voltage on the unit housing
Switch the unit off for 1-2 minutes and then switch
it on again
No power
Power cord is not connected to electricity supply
network
Insert the power cord securely into the household
socket