SoundMax SM-CDM1047 - Manual (Page 15)

15
General operations
Power button
Press any button (except OPEN and EJECT) on the panel or insert disc to switch the unit on. Press PWR
(POWER) button to switch the unit off.
Volume control
Rotate VOL regulator on the front panel or press VOL+/VOL- buttons on the RC to adjust volume level.
Mute
Press MUTE button to mute the sound at once. Press again or adjust volume to return to the previous volume
level.
Audio settings adjustment
Press SEL button shortly and repeatedly to select a mode: BAS (bass) => TRB (treble) => BAL (balance) =>
FAD (fader). Rotate VOL regulator on the front panel or press VOL+/VOL- buttons on the RC to adjust each
mode.
Note: When DSP is on, bass and treble adjustment is not available.
Caution: In each mode, the waiting time is several seconds, and when the waiting time is over, it returns to
the last display mode of radio or disc playback mode.
Mode selection
Press MODE button to choose a sound source: RADIO => AUX => CD => SD/MMC => USB.
Loudness control
Press and hold SEL button, then press it repeatedly until LOUD ON is displayed. Rotate VOL regulator on the
front panel or press VOL+/VOL- buttons on the RC to select Loudness ON or OFF.
Clock
Press DISP button to switch between clock display and current mode display. Press and hold DISP button;
clock will blink. Rotate VOL regulator clockwise to set hours; rotate it anti-clockwise to set minutes.