SoundMax SM-CDM1047 - Manual (Page 17)

17
Radio operations
Band selection
Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, FM4 (OIRT),
MW1 (AM1), MW2 (AM2). Each band can store 6 preset stations, for a total of 36 preset memory stations.
Tuning
Press PREVIOUS or NEXT button; the unit will automatically search a nearest statoin with a strongl signal. To
search next station repeat this procedure. To stop the automatical search, press PREVIOUS or NEXT button.
Press and hold PREVIOUS or NEXT button to activate manual search mode (MANUAL will be displayed). Press
PREVIOUS/NEXT buttons to search for a station manually. If you don’t press any button within several
seconds, the unit will return to auto search mode.
Automatic store/Scan
Automatic store: Press and hold AMS button, the receiver will automatically scan and save stations for the
current band.
Scan: Press AMS button once to scan the saved stations in each band.
Programming stations
There are six numbered preset buttons, under which you can store and recall stations for each band. Select
the needed station, then press and hold a preset button. The station will be saved in the memory under the
corresponding number. To recall a stored station, press the corresponding preset button.