SoundMax SM-SA6021 - Manual (Page 8)

SOUNDMAX SM-SA6021
8
FIG. 2 POWER SUPPLY/REMOTE TURN-ON CONNECTION
(1) Terminal for +12V battery voltage
(2) REM terminal for remote turn-on
(3) GND terminal for the ground, to the battery negative pole
(4) Battery
(5) Cable fuse
(6) Remote turn-on line
If your car is not equipped with Remote turn-on line connection, connect this cable plus pole (+)
to the ignition lock. An on/off switch should be inserted in this case. Make sure that this switch is
turned off if the amplifier is not used.
Fig.2
Note: Place the fuse in the power supply lead as close as possible to the car battery.