SoundMax SM-SA6021 - Manual (Page 9)

SOUNDMAX SM-SA6021
9
FIG. 3 STEREO MODE
Connect and set the amplifier as shown in Fig. 3, when the stereo has two outputs and the unit is used to drive
two loudspeakers. The high-pass filter must be activated if the amplifier drives satellite loudspeakers.
See section HIGH-PASS FILTER WITH ADJUSTABLE CROSS-OVER FREQUENCY to catch how to regulate the high
pass filter.
(1) To the car radio, left output
(2) To the car radio, right output
(3) Loudspeaker left
(4) Loudspeaker right
Fig. 3
Note: if you want to use an amplifier in standard 2CH speaker system, connect the speakers as illustrated above
and switch the CROSSOVER to OFF. The output signals to speaker will be a standard stereo of the right and left
output signals.