TIMBERK THU UL 03 series - Manual (Page 4)

5. List of parts
1. Air humidifier 1
2. User's manual - 1
. Guarantee slip - 1
4. Package - 1
6. Filling of tank with water
To fill the tank see Figure 2.
Fig. 2
ATTENTION!
To avoid the electric shock, unplug the appliance before dismantling
(removing of the tank)! Do not fill the tank with other liquids, except for tap
water. Other liquids have unfavorable effect upon internal components and
lead to failure.
Do not fill the appliance or the water tank with such additives as essential oil,
flavouring agent, detergent, chemical pharmaceuticals, hot water (over 40°),
etc. Otherwise, the water tank and internal components will be damaged
and get out of order. Do not fill the water directly in internal part of the
appliance or in the diffuser. The presence of water inside the appliance may
result in its failure.
Do not hit or throw the water tank. It may be damaged, which will result in
water leakage. Do not use the appliance in case of heavy shock of the tank.
Apply to the maintenance service or service center immediately. Fill the tank
with pure water every day and keep the appliance clean.
Steam outlet rate regulator
Turning the controller to the right and to the left, you may control the steam
intensity. Higher intensity of steam escape results in stronger and faster air
humidification.
Night operation mode
To choose night operation mode, put on/off and steam outlet rate regulator in
« » position
In night mode the device operates with less intensity. Depending on the ambient
temperature, humidification capacity may vary from 80 to 100 ml/h
Relative air humidity for comfortable conditions should be between 40 and 60%.
You may define a favourable humidity level on the basis of your own feelings or
use a special device - hygrometer*, measuring a relative humidity level.
Air flavouring
The appliance is equipped with a chamber for aromatic oil. When the aromatic oil
is added, the air will be flavoured. Aromatic oil is not included in the delivery set.
Automatic cut-out in the absence of water
Upon fall of water level in the reservoir lower minimum allowed the
ultrasound membrane of the device cuts out automatically. The red detector
lights up on the control panel. To continue the device functioning it is
necessary to fill the reservoir with water in accordance with the paragraph 5
Filling the reservoir with water .
Shutdown of device
o switch off the device, put on/off and steam outlet rate regulator in « »
position
4 www.timberk.com electric humidifier
7. Appliance operation
Switching on/off, control of steam escape intensity
Plug the appliance. Before that, fill the tank with water. Turn the on-and-off
and steam escape intensity controller to the right.
The appliance will switch on, the indication light will flash and steam will
come out from the diffuser. In the very beginning of this operation the
diffusion level may be unstable, which is caused by temperature difference
and water quality. Stabilization of this process will take a short time.
DESCRIPTION OF SYMBOLS
8. artridge filter for water softening
The delivery set includes 1 cartridge filter with balls of mineral stone, which
has a strong absorption properties. Filter disinfects water, absorbs the
elements of heavy metals such as lead, chromium, mercury, zinc, etc.
Restores the normal acidity of the water (PH).
Filter service life is 4-6 months, depending on the quality of water used and
the frequency of use of the device.
If white marks appear on objects around the moistener, when the air
humidifier is used, this may be caused by the following:
1. Used water contains much magnesium or calcium. It is necessary to use
water pretreated in a household water filter or distilled water removing the
filter beforehand.
2. Remains of calcium and manganese salts accumulated inside the
appliance. It is necessary to clean the appliance inside.
3. Steam settles airborne dust onto surface.
- On ; - Off ; - Night mode