TIMBERK TAW H2 D - Manual (Page 6)

6
Low air flow
(insufficient
performance)
Remedy Defect Possible cause
The device operates in
the economy mode
No defect. If necessary to switch to the intensive
mode, press Atomizing frequency button in
the manual setting mode and switch the unit
to the intensive operation mode.
No air flow The plug is poorly
inserted into an outlet
Connect the plug into an outlet carefully
Light on the water
indicator has illuminated
and went out (water
tank is completely empty)
Add water to the tank
Difference between the
level of current humidity
and readings of a
humidity recorder
is too big
Dirt accumulation
inside an air vent
Clean the air vent. Even in one room humidity
can be different depending on the location
The unit is operated in
places, where it is affected
by the environment,
for example, by a window
Install the unit in places, where it cannot be
affected by the environment
Air flow has an
unpleasant odor
Not fresh water in use
Stale water or debris
accumulated
in the water tray
Clean the unit in accordance with the cleaning
and maintenance manual and fill it with fresh
water
Table 2.
www.timberk.com electric air washer (purifier)