Philips HR1851 - Manual (Page 8)

Do not exert too much pressure on the pusher, as this could affect the quality of the end result and
it could even cause the filter to come to a halt.
Never insert your fingers or an object into the feeding tube.
5 After you have processed all ingredients and the juice flow has stopped, switch off the
appliance and wait until the filter has stopped rotating.
6 Pour the juice from the jug into the glass.
, The removable foam separator separates the foam from the juice (Fig. 8).
tips
- Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots, celery stalks,
apples, cucumbers, carrots, spinach, melons, tomatoes, oranges and grapes are particularly
suitable for processing in the juicer.
- You do not have to remove thin peels or skins. Only thick peels, e.g. those of oranges, pineapples
and uncooked beetroots, need to be removed. Also remove the white pith of citrus fruits
because it has a bitter taste.
- If you want to juice fruits with stones, remove the stone before juicing.
- Apple juice turns brown very quickly. You can slow down this process by adding a few drops of
lemon juice.
- Fruits that contain starch, such as bananas, papayas, avocados, figs and mangoes are not suitable
for processing in the juicer. Use a food processor, blender or hand blender to process these
fruits.
- Leaves and leaf stalks of e.g. lettuce can also be processed in the juicer.
- The juicer is not suitable for processing very hard and/or fibrous/starchy fruits or vegetables
such as sugar cane.
Cleaning
- The appliance is easier to clean if you do so immediately after use.
- Never use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol, petrol or
acetone to clean the appliance.
- All detachable parts are dishwasher-safe.
1 Switch off the appliance, remove the plug from the wall socket and wait until the filter has
stopped rotating.
2 Remove the dirty parts from the motor unit. Dissassemble the appliance in the following
order:
- Remove the pulp container;
- Remove the pusher;
- Open the clamps;
- Remove the lid.
3 Remove the juice collector together with the filter and then remove the spout from the juice
collector (Fig. 9).
4 Clean all parts except the motor unit with a cleaning brush in warm water with some
washing-up liquid and rinse them under the tap.
Note: Make sure you use a soft cleaning brush to clean the filter.
5 Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
EnglisH 8