HONDA 2011 Civic Coupe User Manual

Page 315

Advertising
background image

Check the fluid level with the
transmission at normal operating
temperature and the vehicle sitting
on level ground. Remove the
transmission filler bolt, and carefully
feel inside the bolt hole with your
finger. The fluid level should be up
to the edge of the bolt hole. If it is
not, add Honda Manual
Transmission Fluid (MTF) until it
starts to run out of the hole. Reinstall
the filler bolt, and tighten it securely.

The transmission should be drained
and refilled with new fluid according
to the Maintenance Minder

(see

page

).

If you are not sure how to add fluid,
contact your dealer.

If Honda MTF is not available, you
may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API
Certification Seal that says ‘‘FOR
GASOLINE ENGINES’’ as a
temporary replacement. However,
motor oil does not contain the proper
additives, and continued use can
cause stiffer shifting. Replace as
soon as it is convenient.

291

CONTINUED

Manual Transmission Fluid

Automatic Transmission Fluid, Manual Transmission Fluid

Ma

int
e

na
nce

309

FILLER BOLT

Correct Level

Correct Level

Si

FILLER BOLT

DX, DX-G, LX, SE, EX, EX-L

TM

Use only Honda ATF DW-1 (automatic
transmission f luid). Do not mix with
other transmission f luids.
Using transmission f luid other than
Honda ATF DW-1 may cause
deterioration in transmission operation
and durability, and could result in
damage to the transmission.
Damage resulting f rom the use of
transmission f luid other than Honda
ATF DW-1 is not covered by the Honda
new vehicle warranty.

10/06/24 17:02:12 31SVA650_314

Advertising