Installing a child seat, 2010 ridgeline – HONDA 2010 Ridgeline User Manual

Page 49

Advertising
background image

Lift the head restraint (see page

), then route the tether strap

over the seat-back and through
the head restraint legs.
Lift the cover, then route the
tether strap around the upper
guide. Route the tether strap
downward properly, making sure
the strap is not twisted, then
attach the strap hook to the tether
anchor on the outside of the seat
bottom (see page

).

Push and pull the child seat
forward and from side-to-side to
verify that it is secure.

Tighten the strap according to the
seat maker’s instructions.

6.

7.

8.

48

123

On the outer seating position

Installing a Child Seat

Dr
iv

er
and

P

asseng

er
Saf

e

ty

45

UPPER GUIDE

Outer Position

UPPER GUIDE

Center Position

TETHER ANCHOR

TETHER ANCHOR

09/07/18 14:05:09 31SJC640_050

2010 Ridgeline

Advertising
This manual is related to the following products: