Siemens TK76009 - Manual (Page 29)

25
de en
● Press the
a
button 2. The brand logo
lights up in the display 5. The appliance
now heats up and rinses. Some water will
run out of the coffee outlet 9. The
appliance is ready for use when the
symbols for selecting the type of coffee
preparation appear in the display 5.
E
SPRESSO
Л Н
В Г А Б Д Е
Note: The factory settings of the fully
automatic espresso machine are
programmed for optimal performance. The
appliance switches to “energy saving mode”
automatically after 1 hour (see “Menu
settings AUTO OFF AFTER”).
Tip: If the appliance is being used for the
first time or has not been operated for a
long period, the first cup of coffee will not
have the full aroma.
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed.
Controls
Power on/off switch O / I
The power switch 1 O / I is used to switch
the appliance to “energy saving mode” or to
switch it off completely. In “energy saving
mode” only the
a
button 2 lights up.
Important: Do not switch the appliance off
at the power on/off switch 1 until it is in
energy saving mode, so that the automatic
rinse process can take place.
a
button
The appliance is switched on (ready for
use) or put into “energy saving mode” with
the
a
button 2.
The
a
button 2 flashes while the appliance
is rinsing.
The appliance does not rinse if:
it is still warm when switched on
no coffee was dispensed before it was
switched to “energy saving mode”.
The appliance is ready for use when the
symbols for drink selection and the start
button 8 light up on the display 5.
Rotary knob
Turn the knob 6 to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons
<
and
>
Press the selection buttons
<
and
>
4 to
navigate up and down through the menu
levels (navigation line 5c).
●
●
SE_TK76_Teil_1_080917.indd 25 18.09.2008 08:40:42