JVC KD-DV4402 - Manual (Page 25)

ENGLISH
25 SETTINGS
Indications Item
( : Initial) Setting, [reference page]
AF-REG * 2
Alternative
frequency/
regionalization
reception
• AF
• AF REG
• OFF
: When the currently received signals become weak, the unit switches
to another station or service (the programme may differ from the one
currently received), [12].
: When the currently received signals become weak, the unit switches
to another station broadcasting the same programme.
: Cancels.
PTY-STANDBY
PTY standby OFF, PTY codes
(see page 11) : Activates PTY Standby Reception with one of the PTY codes, [11, 12].
TA VOLUME
Traffic
announcement
volume VOLUME 00 –
VOLUME 50 (or
VOLUME 00 –
VOLUME 30)
* 3
[Initial: VOLUME 15], [12].
P-SEARCH * 2
Programme search
• ON
• OFF : Activates Programme Search, [12].
: Cancels.
DIMMER
Dimmer • ON
• OFF : Dims the display and button illumination.
: Cancels.
TEL MUTING
Telephone muting • MUTING 1/
MUTING 2
• MUTING OFF
: Select either one which mutes the sounds while using a cellular
phone.
: Cancels.
SCROLL * 4
Scroll
• ONCE
• AUTO
• OFF : Scrolls the displayed information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
• Pressing DISP for more than one second can scroll the display
regardless of the setting.
TAG DISPLAY
Tag display • TAG ON
• TAG OFF : Shows the Tag information while playing MP3/WMA/WAV tracks.
: Cancels.
AMP GAIN
Amplifier gain
control • LOW POWER
• HIGH POWER
: VOLUME 00 – VOLUME 30. (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speaker.)
: VOLUME 00 – VOLUME 50.
IF BAND
Intermediate
frequency band • AUTO
• WIDE
: Increases the tuner selectivity to reduce interference noises between
adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
* 1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select
“CLOCK OFF” to save the car’s battery.
* 2 Only for RDS FM stations.
* 3 Depending on the “AMP GAIN” setting.
* 4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
EN22-27_DV4402_001A_f.indd 25 EN22-27_DV4402_001A_f.indd 25 12/12/07 11:56:06 AM 12/12/07 11:56:06 AM