JVC KW-AV71BT - Manual (Page 9)

9
ENGLISH
Adjusting the volume
To adjust the volume (00 to 50)
• On the source control screen, you can also adjust the
volume by moving your finger on the touch panel
as illustrated. (Not available depending on the AV
source.)
Increase Decrease
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation, press [ ] again.
Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
Monitor panel operations —
Open/Tilt
1
On the source control screen:
2
Open Opens the monitor panel.
Eject Ejects the disc.
Close
Closes the monitor panel.
• Do not place your finger
behind the monitor panel.
Tilt +
Tilt –
Tilts the monitor panel.
Detach Detaches the monitor panel.
(☞ page 5)
Goes back to the current source
screen.
• When the ignition switch is turned to the ACC
position, you can also eject the disc. Press /HOME
to display the <Open/Tilt> screen.
EN_KW-AV71E.indb 9 EN_KW-AV71E.indb 9 12/11/20 11:16 12/11/20 11:16