JVC KW-AVX840 - Manual (Page 41)

41
ENGLISH
Menu item Selectable setting/item Initial: Underlined
D
ispla
y
Display Sensor Change the condition for turning off/on the screen and the light of MENU/
ATT button.
Sensor: Select the condition of the screen for turning on.
♦ Motion : The screen turns on when your hand moves closer to
the motion sensor.
♦ Touch : The screen turns on when your finger touches the touch
panel.
♦ Off : The screen is always turned on while the power is
turned on.
Motion Sensitiv.: Change the sensitivity of the sensor for <Sensor>. (☞
above)
♦ High, Low
Time Out Mode: Select the condition of the screen when no operation is
performed for about 10 seconds while <Sensor> is set to <Motion> or
<Touch>. (☞ above)
♦ Simple : Source control buttons are displayed, and the light of
MENU/ATT button is turned off.
♦ Backgrnd : The background and clock are shown, and the light of
MENU/ATT button is turned off.
• You can change the background. (☞ page 34)
♦ Black Out : The screen and the light of MENU/ATT button are
turned off.
Input
Audio Input* 1 You can determine the use of LINE IN jacks.
♦ AV-IN : Select to listen to the music from an audio component
such as a portable audio player.* 2
♦ iPod : Select when connecting the iPod/iPhone using the USB
Audio and Video cable for iPod/iPhone. (☞ page 26)
Video Input* 1 You can determine the use of VIDEO IN jack.
♦ AV-IN
♦ iPod
: Select to watch the video from an AV component such
as a camcorder.* 2
: Select when connecting the iPod/iPhone using the USB
Audio and Video cable for iPod/iPhone. (☞ page 26)
Camera Input ♦ On
♦ Off
: Displays the picture from rear view camera when you
shift the gear to the reverse (R) position.
: Cancels.
Navigation Change the navigation settings. (☞ page 30)
* 1 You can change the setting only when the AV source is turned off.
* 2 When you watch a video of an AV component, select <AV-IN> for both <Audio Input> and <Video Input>.
EN_KW-AVX840E.indb 41 EN_KW-AVX840E.indb 41 11/01/21 11:52 11/01/21 11:52