JVC KW-AVX840 - Manual (Page 62)

62
ENGLISH
Symptom Remedy/Cause
USB
“Now Reading...” keeps flashing on the
screen. Turn off the power and on again.
While playing a track, sound is sometimes
interrupted. The tracks are not properly copied into the USB device.
Copy tracks again, and try again.
iP
od/iPhone
No sound comes out of the speakers. • Disconnect the iPod, then connect it again.
• Select another source and then reselect “iPod”.
The iPod/iPhone does not turn on or does
not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. (☞ page 26)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of the iPod. For
details, visit <http://www.apple.com>.
No operations are available when playing
back a track containing Artwork. Operate the unit after the Artwork is loaded. (☞ page 27)
Sound does not synchronize with the video. Select <iPod> for both <Audio Input> and <Video
Input>. (☞ page 41)
AV
-IN
No picture appears on the screen. • Turn on the video component if it is not on.
• Connect the video component correctly.
EN_KW-AVX840E.indb 62 EN_KW-AVX840E.indb 62 11/01/21 11:52 11/01/21 11:52