JVC KD-R901 - Manual (Page 18)

ENGLISH
18
2 Move the entry position.
3 Repeat steps 1 and 2 until you finish
entering the phone number.
4 Confirm the entry.
How to delete phone number
• Only when <Manual Trans> is selected for
<Phonebook Select> in Bluetooth setting menu
(see page 34).
1 Enter “Call Menu” screen.
2 Display the list of phone numbers using one
of the calling method (see step 2 of “Making
a call” on page 17).
3 Select the name/phone number you want to
delete.
4 Enter the “Delete Entries” screen.
5 • Select “Delete” to delete the selected item.
• Select “Delete All” to delete all the listed
numbers in step 2 .
Receiving/ending a phone call
When a call comes in....
The source is automatically changed to “BT FRONT/
BT REAR.”
• The display will flash in blue (see <Ring Color> on
page 28 for setting).
When <Auto Answer> is activated....
The unit answers the incoming calls automatically, see
page 33.
• To answer the incoming call when <Auto Answer>
is deactivated:
• To adjust the microphone volume during a phone call
conversation:
The adjustment will not affect the main volume. You
can preset the microphone volume (see pages 33
and 34).
To end the call or reject an incoming call
• When <Auto Answer> is set to <Reject>, the unit
rejects any incoming calls.
Switching conversation media (the unit/
cellular phone)
During a phone call conversation....
Then, continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
Name (or phone number, if acquired)
or
or
EN10-19_KD-R901_003A_3.indd 18 EN10-19_KD-R901_003A_3.indd 18 17/2/09 4:13:19 PM 17/2/09 4:13:19 PM