JVC KD-R901 - Manual (Page 28)

ENGLISH
28
Category Menu items Selectable settings, [reference page]
Color
Ring Color * 3 • On
• Off
: When a call comes in, the display will flash in blue.
• The display will change to the original color when you
answer the call or the incoming call stops.
When the unit receive a SMS, the display only illuminate
in blue.
: Cancels.
Audio
Fad/Bal * 4, * 5
Fader/Balance
R6 – F6
L6 – R6
: Fad: Press
5
/
∞
to adjust the front and rear speaker
output balance. (Initial: 0)
: Bal: Press
4
/
¢
to adjust the left and right
speaker output balance. (Initial: 0)
Loud
Loudness • Loud1/Loud2/
Loud3
• Off
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
Volume Adjust Level –5 —
Level +5
(Initial: Level 0) : Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
• Before making an adjustment, select the source you
want to adjust.
• “FIX” appears on the display if “FM” is selected as the
source.
Subwoofer • LPF/Level
• Phase
: Press 4 / ¢ to select the cutoff frequency to
the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies higher
than 55 Hz/85 Hz/120 Hz are cut off.
Turn the control dial to adjust the subwoofer output level.
Level 00 to Level 08 (Initial: Level 04)
: Turn the control dial to select the subwoofer phase.
0deg (normal) or 180deg (reverse)
HPF
High pass filter Select the cutoff frequency to the front/rear speakers. Set this to match the LPF
settings.
• 62Hz/95Hz/
135Hz
• Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut off.
: All signals are sent to the front/rear speakers.
Beep
Key touch tone • On
• Off : Activates the key touch tone.
: Deactivates the key touch tone.
* 3 Displayed only when USB Bluetooth Adapter (KS-UBT1) is connected.
* 4 If you are using a two-speaker system, set the fader level to <0>.
* 5 This adjustment will not affect the subwoofer output.
EN28-37_KD-R901_003A_3.indd 28 EN28-37_KD-R901_003A_3.indd 28 17/2/09 4:01:26 PM 17/2/09 4:01:26 PM