JVC DLA-HD100 - Manual (Page 41)

41
ENGLISH
Getting Started
Preparation
B
asic Operation
S
ettings
Troubleshootin
g
Othe
rs
D
Install the new lamp unit
E
Tighten the screws of the lamp unit
F
Attach the lamp cover
z
Fasten the screws with a + screwdriver.
z Insert the top part (with 2 claws) of the lamp cover into the unit.
z Fasten the screws with a + screwdriver.
z
Use only genuine replacement
parts for the lamp unit. Also, never
attempt to re-use an old lamp unit.
This may cause a malfunction.
z Do not touch the surface of a new
lamp. This may shorten the lamp
life and cause lamp blowout.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
After Replacing the Lamp
z
Do not place the removed lamp
unit at locations reachable by
children or near combustible items.
z
Dispose used lamp units in the
same way as fluorescent lamps.
Follow your local community rules
for disposal.
CAUTION
MEMO
Claws
DLA-HD100U_EN.book Page 41 Monday, February 25, 2008 4:53 PM