JVC KD-DV7402 - Manual (Page 43)

ENGLISH
43 SETTINGS
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
1 Enter the setting menu.
2 Select “EQ.”
3 Select “On.”
• If “Bypass” is selected, you can listen to the original
sound mode recorded. lights up on the
display.
4 Select a preset sound mode.
Continued on the next page
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
2
• For “EQ” setting, see above.
3
Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ( )
to move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance by
pressing:
5 / ∞ : between the front and rear
speakers. [F6 to R6]
4 / ¢ : between the left and
right speakers. [L6 to R6]
B Subwoofer
1 Press number button 1 ( ) to
move to the “Subwoofer” adjustment
display.
2 Use 4 / ¢ to select a cutoff
frequency to the subwoofer.
• Off *: All signals are sent to the
subwoofer.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4 Press number button 1 ( ) to
move to another setting level.
4
/
¢
: select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
EN34-43_KD-DV7402_003A_f.indd 43 EN34-43_KD-DV7402_003A_f.indd 43 1/28/08 4:07:40 PM 1/28/08 4:07:40 PM