Yamaha PSR-540 - Manual (Page 51)

51
Digital Effects
4
Select “Harmony”.
Use the data dial, the [+/YES] button or the [-/NO] button.
5
Press the [NEXT] button.
6
Select a Harmony/Echo type.
Use the data dial, the [+/YES] button or the [-/NO] button.
Refer to the Harmony/Echo Type List (page 133).
• When the Voice Set function
is ON (page 120), the
Harmony/Echo type may
change according to the
selected R1 panel voice.
Applying the Harmony/Echo effect
4
Press the [HARMONY/ECHO] button.
5
Play some notes in the right-hand range of
the keyboard.
● When a Harmony type (Duet through Strum) is selected
This type automatically add one or more harmony notes to a single-note melody
played in the right hand.
● When an Echo type is selected
An echo effect is applied to the note played on the keyboard at the currently set
tempo.
Steps #1 - #3 above are unnecessary for this type.
● When a Tremolo type is selected
A tremolo effect is applied to the note played on the keyboard at the currently set
tempo.
Steps #1 - #3 above are unnecessary for this type.
● When a Trill type is selected
Two notes held on the keyboard are played alternately at the currently set tempo.
Steps #1 - #3 above are unnecessary for this type.
• Harmony/Echo cannot be
turned on when the Full
Keyboard (page 40) is
selected. Harmony/Echo will
be automatically turned off if
the Full Keyboard fingering
mode is selected while the
Harmony/Echo effect is on.
1
Press the [STYLE] button.
2
Turn AUTO ACCOMPANIMENT on (page 33).
3
Play a chord with your left hand.
For this example, play a C major chord.
Type=Duet
Effect =Harmony
CHORD
dim
mM
6
7 augsus4
119
513
Split Point
Auto Accompaniment
section
DSP(FAST)
SUSTAIN HARMONY
TOUCH
49