Yamaha PSR-540 - Manual (Page 93)

93
91
5
Press the [NEXT] button to display the RecMode screen.
6
Select “Record”.
Use the data dial, the [+/YES] button or the [-/NO] button.
7
Press the [NEXT] button to display the pad number selection
screen.
8
Select a Pad number to record.
Use the data dial, the [+/YES] button or the [-/NO] button.
9
Press the [NEXT] button to display the Rehearsal screen.
Voices can be set from this display. After completing the desired settings, press
the [EXIT] button to return to this display.
10
Press the [NEXT] button to display the Record ready screen.
The beat indicator dots will flash at the currently set tempo, indicating that the
record ready (Synchro Start) mode is engaged.
11
Start recording.
• Recording starts as soon as you play a key on the keyboard.
• Recording can also be started by pressing the [START/STOP] button.
If you are recording a Chord match phrase, use only the CM7 scale tones (i.e. C,
D, E, G, A and B).
12
Press the [START/STOP] button to stop recording.
13
Press the [RECORD] button to exit from the Record mode.
Multi Pad Recording
M.Pad Recording
Rehearsal
Rec Pad=Pad1
RecMode=Record
BEAT
C S C C S C
C = chord tone
C, S = scale tones