Plantronics Voyager PRO - Manual (Page 14)

10
Headset Controls and Indicators
Action Indicator LED Tone
Redial Double-tap call
control button. None Double low tone
Voice-activated redial
(if supported by phone) Press call control
button for 1 second. None Single low tone (phone
may then prompt you to
say a command)
Call indicator LED
(enable/disable) With headset powered
on, press power,
volume + and - buttons
simultaneously for 1
second. Turn indicator on: blue glow
increases for 2 seconds.
Turn indicator off: blue glow
fades for 2 seconds Single low tone
Reconnect after
leaving Bluetooth range
(10 meters) for more
than 30 seconds Tap call control button. Single blue flash Single low tone
dUrATIOn: TAP is under 1 second. PRESS is 1-4 seconds as directed.