Plantronics Voyager 510-USB - Manual (Page 8)

0 0
INDICATOR LIGHTS
15 14
Bluetooth USB adapter indicator lights
Headset indicator lights
Headset status Light
Power Flashes blue
Charging Flashes red
Fully charged Solid blue
Battery low Flashes red
Pairing Flashes red and blue
Bluetooth device
Connected to headset
Flashes blue
Action Light
Disconnected from the headset Flashes purple
Connected to the headset Solid blue
Radio link active Flashes blue
Pairing mode Flashes red and blue
USING YOUR HEADSET
During a call, briefly press the power/mute button to mute the microphone. When muted,
the headset will sound two tones every 30 seconds.
To unmute press the button again.
Adjusting volume
Muting a call
To increase listening volume, press the upper end (+) of the volume button. To decrease
listening volume, press the lower end (-).
To adjust the listen or speak volume of the softphone, please refer to the softphone
user documentation.
To adjust the listen or speak volume of the audio device on the computer, use the Sound
and Audio Device section on the Control Panel.