Placing, answering and ending calls with pc, Switching between desk phone and pc audio, Mixing desk phone and pc audio – Plantronics Savi Office WO350 User Manual

Page 14

Advertising
background image

Plantronics Savi User Guide

14

Placing, answering and ending calls with PC

With Plantronics software*

Without Plantronics software

To place a call

1. Dial number from the supported
softphone application***

1. Briefly press call control button on headset** or
briefly press base PC talk button
2. Dial number from softphone application

To answer a call

1. Briefly press call control button on headset or
briefly press base PC talk button

1. Briefly press call control button on headset** or
briefly press base PC talk button
2. Answer call using softphone application

To end a call

1. Briefly press call control button on headset or
briefly press base PC talk button

1. Briefly press call control button on headset** or
briefly press base PC talk button
2. Hang up call using softphone application

*Assumes use of supported softphone
**Assumes your default line is set to PC
*** Automatically bringing up the PC radio link is not supported when placing an outbound call in Microsoft Office Communicator.

Headset

Base

Press the volume up button (at
least 1½ seconds) until the base
talk button indicator light of the
desired device becomes solid
green.

Briefly press (less than one
second) the base talk button
of the device that you want to
switch to.

Switching between desk phone and

PC audio

You can switch back and forth between desk phone and PC
audio in the following ways:

Mixing desk phone and PC audio

You can mix desk phone and PC audio in the following way:

Base

Simultaneously hold the desk phone and PC talk buttons down
(at least 1½ seconds) until both indicator lights become solid
green.

Advertising