CITIZEN SR-275EU - Manual (Page 10)

SR17D-D1-E.doc SIZE:140x75mm SCALE 2:1 2003/9/15
-E10-
• Pressing [ ENG ] or [ 2nd ] [ ] will cause the exponent display
for the number being displayed to change in multiples of 3. See
Example 11.
• Even if the number of decimal places is specified, internal calcula-
tion for a mantissa is performed up to 15 digits for SR-270ll / SR-
275, and the display value is stored in 10 digits. To round off those
values to the specified number of decimal places, press [ 2nd ]
[ RND ]. See Example 12.
„
Continuous calculation function
• The calculator enables you to repeat the last operation executed
by pressing [ = ] key for further calculation. See Example 13.
• Even if calculations are concluded with the [ = ] key, the result ob-
tained can be used for further calculation. See Example 14.
„
Answer function
• Answer function stores the most recently calculated result. It is re-
tained even after the power is turned off. Once a numeric value or
numeric expression is entered and [ = ] is pressed, the result is
stored by this function. See Example 15.
(Note) : Even if execution of a calculation results in an error,
however, Answer memory retains its current value.
Scientific Calculation
ſ Use the COMP mode for scientific calculations.
„ Logarithms and Antilogarithms
• The calculator can calculate common and natural logarithms and
anti-logarithms using [ log ], [ ln ], [ 2nd ] [ 10
X
], and [ 2nd ] [ e
X
].
See Example 16.
„
Fraction calculation
Fraction value display is as follow :
5 ω12 Display of
12
5
56 ω5 ω12 Display of 56
12
5
(Note) : Values are automatically displayed in decimal format
whenever the total number of digits of a fractional values
(integer + numerator + denominator + separator marks)
exceeds 10.
• To enter a mixed number, enter the integer part, press [a
b
/ c ], en-
ter the numerator, press [a
b
/ c ], and enter the denominator ; To en-
ter an improper fraction, enter the numerator, press [a
b
/ c ], and en-
ter the denominator. See Example 17.