Operation – Candy AB CDC268TEX User Manual

Page 13

Advertising
background image

ENGLISH

Operation

1. Open the door and load the drum with

laundry. Ensure that garments do not
hinder closure of the door.

2. Gently close the door pushing it slowly

until you hear the door ‘click’ shut.

3. Press the ‘ON/OFF’ button to switch

on the dryer. The indicator will light.

4. Turn the ‘PROGRAM’ dial to select

the required drying program:

e.g. if you are drying cotton laundry
and would like it suitable for ironing
please select the iron dry option.

The PRE-IRONING setting shown by the
symbol on the ‘PROGRAM’ dial
provides a conditioning and anti-crease
function. The dryer will heat the load for 9
minutes followed by a 3 minute cool down
period and is especially good for garments
which may have been left for some time
prior to ironing, in a linen basket for
example. Garments may also become
stiffened when dried outside on a washing
line or inside on radiators. The PRE-
IRONING process relaxes the creases in
the fabric making ironing quicker and
easier.

5. If drying delicate items on the ‘timed’

programs press the ‘DELICATES’
button to reduce the heat level. Press
again on completion, to select high
temperature.

If airing or drying very delicate items
select the airing option on the ‘drying
time’ dial ( ).

6. Press the ‘START’ button. The dryer

will start automatically and the
‘HEATING’ indicator will light.

Drying sensor
A sensor will detect when the load is
dry. The drying cycle will then go into
the cooldown period and the
‘COOLING’ indicator will light.

After 10 minutes of cooldown the drum
will stop rotating automatically.

Note:
(i) The sensor may not detect a small
load of small articles. For small loads
and separate items or pre-dried fabrics
with low moisture content, utilise the
timed programmes. Set the programme
between 30 and 75 minutes depending
upon the load size and dryness required
and select high or low heat depending
upon the fabric type. If this is not
carried out the dryer will only operate
for 10 minutes before going into
cooldown.

(ii) If the sensor does not operate, for
example when a load is too large or too
wet to tumble dry, the dryer will
automatically go into cooldown after
180 minutes.

The dryer can be set to start up to 9 hours
after the program has been set.

13

HIGH Heat setting

LOW Heat setting

40000357-English.qxd 23-07-03 10:01 Page 8

Advertising