Candy 2D 966 W - Manual (Page 12)

• This function is typically
used with “cooking time”
function. For example
if the dish has to be cooked
for 45 minutes and needs
to be ready by 12:30,
simply select the required
function, set the cooking
time to 45 minutes and the
end of cooking time to
12:30.
• Cooking will start automa-
tically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set
end-of-cooking-time, when
the oven will switch itself
off automatically.
WARNING.
If the END of cooking is
selected without setting
the length of cooking time,
the oven will start cooking
immediately and it will
s t o p a t t h e E N D o f
cooking time set.
• To be set together with
cooking time duration.
• After turning the function
selector (either than
or ) and after set-
ting the cooking time ( as
explained above).
• Set the end of cooking
time as follows:
- Press the button C
- Press the button E or F
to set the end of cooking
time.
• Confirm your choice by
pressing the button A ; the
‘A’ symbol will appear on
the display and the oven
will begin wait mode.
• The display will alternate
by showing temperature
and time set.
• At the set time the oven
will switch itself on, the ‘A’
symbol will go off and the
‘ ’ symbol will be come
on .
11 GB
If the function is not confirmed by pressing A after 1 minute the oven switches itself
off and the display will show ‘END’, to reset turn the function selector back to “ 0 ” . This
opearation will be followed by the display of ‘ OFF ‘which will be lit for 3 seconds.
Note :the maximum time which can be set with this function is+ 23h 59'
FUNCTION
HOW TO
ACTIVATE IT
HOW TO SWITCH
IT OFF
WHAT IT DOES WHAT IT IS FOR
MINUTE
MINDER
• Allow to use the oven as
alarm clock.
• Can only be used with the
oven switched off
• At the end of the set time
the programmer will
activate an audible alarm
which will ring for 1minute;
to stop the alarm press any
button.
• The minute minder is
automatically set to 0
whenever another function
is selected.
• Sounds an alarm at the
end of the set time
• To check how long is left
press the button D
• Press the button D
• Press the buttons E or F
to set the duration time
• Release the buttons.
• After three seconds the
symbol will be di-
splayed and countdown
will commence.
• The display will indicate the
correct time of the day.
COOKING TIME
DURATION
• Turn the function selector
to a cooking function (either
than
or ) . The
display will show the re-
commended temperature
and cooking time..
• The preset cooking time
can be modified as follows.
- Press the button B
- Press the buttons E or F to
set the cooking time.
- Confirm your choice by
pressing the button A ; the
‘ ’ symbol will appear
on the display and the oven
will begin cooking.
• It allows to preset the
cooking time required for
the recipe chosen.
• The cooking time left to run
is shown on the display.
• To view the temperature
set, press the button F
• To change the cooking
time/duration, press the
button
B and then press
the buttons E or F
• For cooking the desired
recipes.
• When the time has elapsed
the oven will switch off
automatically; the display
will show the word "
END "
and an audible alarm is
activated for 1 minute;
• the alarm can be stopped
by pressing any button or
by turning the function
control back to
“0” . In the
latter ‘ OFF’ will be lit for
3 seconds.
• To stop the cooking
function early turn the
function control back to
“
0” .
If the function is not confirmed by pressing A, after 1 minute the oven switches itself
off and the display will show ‘END’, to reset turn the function selector back to 0.
This operation will be followed by the display of ‘ OFF ‘which will be lit for 3 seconds.
Note :the maximum cooking duration is 10 hrs and the minimum is 2 mins .
END OF
COOKING
• At the set time the oven will
switch off; display will show
the word "
END " and an
audible alarm is activated
for 1 minute;
• the alarm can be stopped
by pressing any button or
by turning the function
control back to
“0” . In the
latter “OFF” will be lit for
3 seconds.
• To stop the cooking function
early turn the function
control back to
“0” .
• Enables you to set the end
of cooking time.
• The cooking time left to run
is shown on the display.
• To view the temperature
set press the button F
• To change the cooking
time/duration press the
button
B and then press
the buttons E or F
USE OF THE ELECTRONIC PROGRAMMER
SETTING THE CORRECT TIME
• Setting the TIME
Press the button ‘E’ or ‘F’ to set the time. The display will show hh :mm ( 24 hours) the range is
between 0 :00 and 23.59. After 3 second have elapsed from releasing the buttons to change the time
press the button ‘D’ hold for 5 seconds and press ‘E’ or ‘F’. The new time will now be set.
ATTENTION: When the programmer is in waiting mode ( delay start set ) the set temperature is displayed alternatively with
time.
N.B.
At any stage during cooking it is possible to check the oven temperature by pressing the button "F"
WARNING: The oven will work only once the time has been set..
The oven will not work if the clock is showing a pulsating .
The time can only be set with the function selector in the 0 position .