Candy AB CDV 262 - Manual (Page 9)

6. The load is dried by tumbling in
thermostatically controlled warm air.
Cool air is used for the last 15 minutes
to reduce creasing and cool the load
ready for handling.
7. When the program is fully completed
the drum will stop rotating and the dial
will point to the symbol (
▼).
Open the door and remove the load.
8. Clean the filter after every drying cycle
to ensure maximum dryer efficiency.
(See ‘Filter’ section.)
Operation
9
WARNING!
THE DRUM, DOOR AND LOAD
MAY BE VERY HOT.
Operation
1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. If drying delicate items press the
‘HEAT SETTING’ button to reduce the
heat level. Press again on completion, to
select high temperature.
3. Turn ‘DRYING TIME’ dial until the
required drying time aligns with the
symbol (
▼).
4. Gently close the door pushing it slowly
until you hear the door ‘click’ shut.
5. Press the ‘ON’ button. The indicator
will light and the drying cycle begins.
HIGH Heat setting
LOW Heat setting
40000183.qxd 11/3/04 5:31 pm Page 9