Acclaim Lighting ART 9 - Manual (Page 4)

1 2 3
4 5 6
7 8 9
1
2
ART-9 (EU)
3
4
5
6
7
8
Control Panel and Functions
Page 2
1. Power key
Used to power on/off ART-9.
7. Touch toggle
Used to adjust color, brightness and speed, and select built-in programs.
5. B key (brightness)
Used to adjust brightness.
2. C key (color)
Used to select color.
3. P key (program)
Used to select Built-in program.
4. S key (speed)
Used to adjust speed.
6. Output Indicator
Used to display the current output.
8. Figure keys (1~9)
Used to record scene and color, as well as set fadetime.
Figure 1: ART-9
ART-9 User Instruction
Operation Guide
Each figure key can have a color, or a , or both elements recorded. scene
6.1 Recording SCENE
Up to 9 scenes can be recorded and played back in this mode. Each figure key
corresponds to one scene. The procedure to record a scene is described below:
Touch enable Auto Mode, the key clicks and the LED
indicator lights up.
"P" or "S" key to
Repeat step a~d to save more scenes to the other 8 figure keys.
All indicators flash momentarily once to indicate the current parameters
(including the built-in program and the value of speed and brightness) have
been recorded and saved into the key.
Touch any of the figure keys to which you wish to record the scene, and hold
on for more than 2 seconds.
a.
b.
c.
d.
Rotate the touch toggle to select the built-in program or adjust the speed.
e.
Touch "P" or "S" key to enable Auto Mode. Then touch the corresponding button
of 1~9 to raise the scene which has been stored in it. The LED indicator lights
up and it starts to display the recorded scene.
6.2 Playback SCENE
* NOTE:
6.3 SCENE Record Lock/Unlock
To unlock scene record, touch "P" key and "S" key and hold on for about 10
seconds until all keys flash once.
To lock scene record, touch "S" key and "P" key simultaneously and hold on for
about 10 seconds. At this time, the "S" key is not valid. Besides, the figure
keys1~9 can play back saved scenes only, but can not record scenes.
6. SCENE
Page 7 ART-9 User Instruction