Accusys ExaRAID A24U-SS - Manual (Page 32)

System Connections
25
3.3 Connecting the CLI Management Port
The RAID system can be managed using the CLI.
To connect the CLI port, follow the procedures below:
1. Insert the RS-232 cable into the COM port.
2. Insert the other end to an external terminal.
3.4 Connecting JBOD Enclosure
Follow the procedures below to connect to A12R-SJ, A16R-SJ, or A24-RSJ
(JBOD) .
1. Insert a SAS connector to the EXP port on the controller.
Note
• The illustration above shows A16R-FS. The same procedures apply
to A12R-FS&SS, A16R-SS, and A24R-FS&SS.
• Please refer to the software user manual for more information on
CLI management.
Figure 3-2 A16R-FS COM port connection
Figure 3-3 JBOD expansion on A16R-FS