Accusys ExaRAID A24U-SS - Manual (Page 45)

Maintenance
38
4. Connect the small end of the cable to the connector port of the BBM.
Then connect the other end to the cooling fan tray.
For A12R controllers, follow the same procedures to install the second
BBM on the allocated slot in the other cooling fan.
4.6.2 A16R/U-FS&SS BBM Installation
To install the BBM on A16R/U-FS&SS, follow the procedures below:
1. Loosen the screws and pull out the IO tray.
2. Place the BBM on the allocated slot with the connector port facing the
IO board (A).
BBM 1
BBM 2
A
B