Accusys StorConn GUI - Manual (Page 10)

http://www.accusys.com.tw 9
User’s Manual
9.
Two shortcut icons will be created on
desktop after software installation.
StorConn Server is to launch StorConn
GUI program.
Monitor Window is to open StorConn
monitor window.
2.3. Configure StorConn
1. RAID detection will commence to obtain information
from the RAID box via SATA or RS232.
The Detect Process dialog box shows the progress of
the system’s detection of RAID box.
1. To launch StorConn Server, go to Start > Programs > StorConn> StorConnServer.
2. The Detect Option dialog box will appear prompting
you to scan the RAID box. StorConn supports
in-band and out-band connection. Select “No” for not
detect COM port device if you want to use in-band
connection.
Note
StorConn Server can obtain RAID system information through
the SATA connection or through the RS232 (COM port)
connection. The program always checks first for the SATA
connection, then the RS232 connection. If both connections
are present, COM port is used.