Accusys StorConn GUI - Manual (Page 27)

http://www.accusys.com.tw 26
User’s Manual
6. Enter the following values:
Mail Server: Enter the IP address of
the mail server in your network
Sender: Enter an email address
to identify the source of the alert
email
Receiver: Enter up to three
e-mail addresses to which an
email will be sent. Please add
semicolon between mail
address.
Notify time (minutes): Enter the
interval time between successive
alert email dispatches (minimum
value: 1 / maximum value:
65536)
COM Port 1~4: Mac users should
keep the default setting .
7. After fill up the above information,
click on Save to go to next step.
8. Click on Close to complete the
installation.