Rmc 7135, 4 serial ata drive carrier leds – Acnodes RMC 7135 User Manual
Page 27
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7135
1U Rackmount System
Power
Indicates power is being supplied to the system's power supply units. This LED should normally be
illuminated when the system is operating.
3-4
Serial ATA Drive Carrier LEDs
Each Serial ATA drive has both a green and a red LED.
o Green: Each Serial ATA drive carrier has a green LED. When illuminated, this green LED (on the front
of the SATA drive carrier) indicates drive activity. A connection to the SATA backplane enables this LED
to blink on and off when that particular drive is being accessed. Please refer to Chapter 6 for instructions
on replacing failed SATA drives.
o Red: The red LED to indicate an SATA drive failure. If one of the SATA drives fail, you should be
notified by your system management software. Please refer to Chapter 6 for instructions on replacing
failed SATA drives.