Acnodes RMC 7135 - Manual (Page 96)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7135
1U Rackmount System
B-2 Installing Windows on Non-RAID Systems
1. Insert Microsoft's Windows XP/2003 Setup CD in the CD drive and the sys- tem will start boot-
ing up from the CD.
2. Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or
RAID driver" displays.
3. When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s).
4. Insert the driver diskette you want to install into Drive A: and press the <En- ter> key.
5. Press the <Enter> key to proceed with the installation process. (If you need to specify any addi-
tional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter>
key to continue with the installation.
6. From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003 Setup will
automatically load all device files and then continue with the Windows XP/2003 installation.
7. After the Windows XP/2003 OS installation is complete, the system will auto- matically reboot.
8. Insert the Supermicro Setup CD that came with your system into the CD drive during system
boot, and the main screen shown on page 5-26 will display. Follow the instructions given to com-
plete the installation.