Acnodes IPS - Manual (Page 14)

Single port KVM over IP switch
11
¾ Make sure that the cable is wired appropriately for a standard 100BASE-TX adapter.
¾ Align the RJ-45 plug with the notch on the adapter’s connector and insert it into the
adapter’s connector.
3.3 Scenario of connecting IP-KVM switch to the Multi-port KVM Switch system
3.4 Connecting the External Reset/Power Option
Please refer to the manual of the IP-KVM 8/16/32 port external power switch option or a third
party external power option to connect those external devices to one of the serial interface on the
rear side of IP-KVM switch. By the date of printing this manual supported options are:
¾ .
Avocent.SPC1 800/1600
¾ Sentry In-Line Power Module
¾ Leaning
ePowerSwitch
¾ Peppercon
IPM-220L