Acnodes IPS - Manual (Page 48)

Single port KVM over IP switch
45
6.4.4 Video
Figure 6-18. Video Settings
Local Video Port Settings
Enable local video port
This option decides if the local video output of the IP-KVM switch is active and passing
through the incoming signal from the host system.
Miscellaneous Video Settings
• Noise filter
This option defines how the IP-KVM switch reacts to small changes in the video input
signal. A large filter setting needs less network traffic and leads to a faster video display,
but small changes in some display regions may not be recognized immediately. A small
filter displays all changes instantly but may lead to a constant amount of network traffic
even if the display content is not really changing (depending on the quality of the video
input signal). All in all the default setting should be suitable for most situations.
• Force Composite Sync (Required for Sun Computers)
To support signal transmission from a Sun machine, enable this option. If not enabled
the picture of the remote console will not be visible.
To set the options, click on the button “ Apply ” .
6.5 Device Settings
6.5.1 Network
The Network Settings panel as shown in Figure 6-19 allows changing network related
parameters. Each parameter will be explained below. Once applied the new network settings
will immediately come into effect.