Acnodes FES 2217 - Manual (Page 25)

3-3.2 Chipset Configuration
Set Panel Type by
Use this to configure Set Panel Type.The Default value is [UEFI Setup].
Panel Type Selection
Use this to select panel type. The default value is [1366x768/ 18-bit/ 1-ch/LED].
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is [Enabled]. Please set this
option to [Enabled] if you plan to use this motherboard to submit W indows® certification.
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected,
the AC/ power remains off when the power recovers. If [Power On] is selected, the AC/power resumes
and the system starts to boot up when the power recovers.
Onboard HD Audio
Select [Audio], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the
onboard HD Audio will be disabled when PCI Sound Card is plugged.
Front Panel
Select [Auto] or [Disabled] for the onboard HD Audio Front Panel.
Onboard LAN 1
This allow you to enable or disable the “Onboard LAN 1” feature.
Onboard LAN 2
This allow you to enable or disable the “Onboard LAN 2” feature.