Acnodes RMQ 8170 - Manual (Page 17)

P.13
Chapter 3
3.4 Connection
RPWQ 1190
RS-232 VCR in Video IN
1 ~ 4
Alarm I/O VCR out
Video Loop
1 ~ 4 S-Video VGA Power
■
Please refer to P.28 - 40
Caution : The Rack mount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rack mount LCD Drawer. Before attempting to connect
anything to the Rack mount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rack
mount LCD Drawer receiving power. The company is not responsible for damage caused
in this way.