Pch 3098, 3 jumpers setting and connectors – Acnodes PCH 3298 User Manual
Page 14
PCH 3098
8 inch Atom Fanless Panel PC
© Copyright 2012 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
14628 Central Ave.
Chino, CA91710
Tel:909.597.7588, Fax:909.597.1939
2.3 Jumpers Setting and Connectors
1. JP5:
(2.0mm Pitch 1X2 Pin Header), ATX Power and AT Power sett
JP5
Mode
Open
ATX Power Mode
Close
AT Power Mode
2. PW R1 :
(5.0mm 1x2 Pin Connector),DC9V~30V System power in
Pin#
Signal Name
1
+DC9V~DC30V
2
Ground
Note:
Make sure that the voltage of power supply is DC9V~30V before p
cause boot up failure and even system damage.
3. BAT1:
(1.25mm Pitch 1X2 box Pin Header) 3.0V Li battery is embed
power for
CMOS.
Pin#
Signal Name
Pin1
VBAT
PIN2
Ground