Pch 5121, 1 unpack the panel pc – Acnodes PCH 5121 User Manual
Page 14
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PCH 5121
12.1” industrial Panel PC
1000-nit Sun light readable screen
IP67 rated fully enclosure
2.1 UNPACK THE PANEL PC
To unpack the flat panel PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after installation. The plastic layer
protects the monitor surface during installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box.
2.2 PACKING LIST
1 x PCH5120/PCH5121
1 x Power Cable
6 x Connector Cap
1 x Panel mounting screws
1 x Touch Screen Pen
These optional items are also available.
1 x USB Cable
1 x Audio Cable
1 x LAN cable
1 x Power Adapter
1 x Serial port cable
1 x CAN bus cable