Pch 5121 – Acnodes PCH 5121 User Manual
Page 27
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PCH 5121
12.1” industrial Panel PC
1000-nit Sun light readable screen
IP67 rated fully enclosure
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 port.
3.7.3 SERIAL DEVICE CABLE
The serial device connectors are for connecting serial devices. Follow the steps below to connect a serial
device to the panel PC.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 2.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on
the bottom panel. See Figure 3-14.