ACR&Artex RCL-75 - Manual (Page 16)

Y1-03-0158 Rev. J 15
APPENDIX A - SPECIFICATIONS
NOTE: Specifications are for the RCL-75 with remote control Point
Pad™
RCL-75 Specifications
Power requirements 12
– 14 Volts DC
Current draw 10 Amps
Power wire leads 14 Gauge
Wire harness
17’ minimum with Molex® quick
connect locking connectors on
each end
Peak beam candle power 180,000 candela*
Lamp Dual beam 55 watt halogen
Reflector size
6” x 4.5”
Beam spread (degrees)
Horizontal 8° Approx.
Vertical 3° Approx.
Elevation angle (degrees)
Up 18°
Down 45°
Turning angle (degrees) 360°
Elevation speed (top to bottom) 10 seconds
Turning speed (1 revolution) 20 seconds (18° per sec
approx.)
Weight 4.2 Lbs. (1.9 kg)
*Measured with direct light meter at 100’